Category: Suspension

Trail-Gears Solid Axle Hanger kit contains Front offset hanger w/ gussets Greasable shackles Frame tubes Tube jigs Hanger kit allows of hanging of leaf springs on 1986-1995 Toyota Pickups and 4Runners. Kit designed to work with many 3&#34 – 6&#34 lift aftermarket springs. Frame jigs make it easy to place shackle tubes in your frame. To install, place jigs on frame under the cab body mount. Mark the frame, and cut frame tube holes with torch. Slide tubes in place and weld in. Clamp front hanger in place and weld. Bolt on springs with included bushings and shackles.

 

Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes on top of hangers allow rosette welds. Made from 1/4&#34 plate steel. Much stronger then stock hangers. 18mm bolt holes. Unpainted finish.

 

If you&#39re installing longer rear springs you may need to relocate your rear shackle mount. You can do this by cutting off the original units with a die grinder and then welding them back on. You can also cut off the old ones and install new ones. Our shackle mounts use OEM bushings and are much stronger then stock units. Made from 1/4&#34 plate steel. Unpainted finish.