Category: Suspension

When building a flexible suspension it is important to have plenty of shock travel. Stock length shocks simply won&#39t travel far enough to keep up with our flexible springs. We recommend shocks with 12&#34-14&#34 of travel. Our tall hoops will accommodate 14&#34 Bilstein Shocks and require the inner fender to be cut and shocks installed with the top above the inner fender.. Our Medium Hoops will accommodate 12&#34 shocks without cutting the inner fenders. Weld on installation. Unpainted finish.

 

Welded hangers are made by welding two plates together, leaving a tab on one side. This tab makes it easier to install. The tab positions the hanger on the frame. Holes on top of hangers allow rosette welds. Made from 1/4&#34 plate steel. Much stronger then stock hangers. 18mm bolt holes. Unpainted finish.

 

U-bolt flip kits help increase ground clearance under your rig. Stock u-bolts face down and offer a snag point for rock and trail debris. Our u-bolt flip kit point the spring bolt up and out of harm way. This results in better ground clearance and less damage to the thread section of the bolt. Each kit contains two flip plates and four 9/16&#34 bolts with nuts and washers. Front kits will accommodate spring packs up to 2&#34 thick. Rear kit will accommodate spring packs up to 2.5&#34 thick. Crossover steering required for installation of flip kit. Unpainted finish.