Category: Bumpers

These rear bumpers are some of the first in the industry that are constructed out of 100% DOM tubing. The 1.75” OD X .120” wall thick DOM tubing will give you all the protection your 4Runner or Pickup needs while playing on the rocks. Four models fit either 1984-1995 4Runner or 1984-1995 Pickup. The bumper is shipped unpainted and lightly oiled to prevent rusting during shipping. Note: Optional Rear Bumper to Frame Support Kit will not work with 84-88 or 89-95 Pickup bumper.

 

When it comes to protecting your truck DOM steel is far stronger and dent resistant when compared to HREW tubing. That&#39s why every Trail-Gear Rock Defense tube bumper is made entirely out of DOM tubing (1.75&#34 X .120&#34 wall). Each bumper is carefully built on our jigs right here in Fresno CA. Rock Defensetm bumpers are built using our winch mounting plate and feature a front 2&#34 receiver. Mounting holes are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches. Bumpers mount to the factory holes on the front of 1984-1995 Toyota Pickup&#39s and 4Runners. Notes: Turn signal mounting tabs are not included. Unpainted steel finish. If using a winch with an integrated solenoid, such as the Warn 9500, trimming of the front plastic grill will be necessary. Will not work with roller type fairlead, requires hawse type fairlead. Not intended for use with a body lift.

 

Features:

• Durable steel construction for maximum protection
• Provision for IPF driving and fog lights
• Split pan design for optimum strength and airflow
• Superbly engineered, airbag compatible mounting system secures to chassis using high tensile bolts
• Five fold upswept & tapered wing design for optimum strength and approach angle
• Continuous uprights through the bumper section of the bar strengthens the outer frame
• Cover straps attached to the uprights ensure there are no exposed sharp edges
• Compatible with a range of Warn winch models
• Recessed indicators and parking lights
• Hi-Lift jacking and recovery points
• Retains original tow points under chassis
• Provision for two CB aerials
• Lower protection panels supplied in kit
• Finished in a hard-wearing powder coat

Optional ARB fog lamp kit part no. 6821201. (MD02) Loom (180209S) Switch & (180215) cap required when fitting 6821201 to models without OE fog lamps.