Category: Joints and Rod Ends

These heavy duty rod ends are ideal for today&#39s flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball is made from 8620 tool steel and rides on high quality polyurethane bushings. Heavy-duty, hardened steel washers hold the joint together. Creeper Joints are super flexible and allow for up to 40 degrees of movement when used with spacers. A threaded grease fitting is provided on top for lubrication. The flex ball is drilled for cross lubrication flow from the shell to the link mount bolt. Each joint includes a jam nut! Three different flex ball sizes; 9/16&#34, 5/8&#34 & 18mm, allow you to choose the right size to match your application. The threaded section is 1-1/4&#34 in diameter with 12 threads per inch. Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint shackle mounts are sold in pairs and do not include the shackles, bolts or spring bushings.

 

Heavy duty link material. Made from seamless DOM. 2&#34 OD, 1.5&#34 ID, .25 wall. $1.80 per inch. When ordering online you can change the total quantity to the total number of inches you wish to purchase after you click add to shopping cart. Please include cut lengths in the notes section if ordering more then one link. Maximum shippable length 5&#39. Example, If you want two lengths that are 36&#34 long each, then enter a quantity of 72&#34 and in the notes section enter &#34Two lengths at 36&#34 each&#34.

 

These heavy duty rod ends are ideal for today&#39s flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball is made from 8620 tool steel and rides on high quality polyurethane bushings. Heavy-duty, hardened steel washers hold the joint together. Creeper Joints are super flexible and allow for up to 40 degrees of movement when used with spacers. A threaded grease fitting is provided on top for lubrication. The flex ball is drilled for cross lubrication flow from the shell to the link mount bolt. Each joint includes a jam nut! Three different flex ball sizes; 9/16&#34, 5/8&#34 & 18mm, allow you to choose the right size to match your application. The threaded section is 1-1/4&#34 in diameter with 12 threads per inch. Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint shackle mounts are sold in pairs and do not include the shackles, bolts or spring bushings.