aFe Stage 2 Cold Air Intake System with Pro-GUARD 7 Type Si – Toyota Tacoma (05-06) V6 St 2 Si

Pro-GUARD 7 high flow high efficiency filter media air filter. Increases horsepower & torque. Maximizes airflow for better acceleration and responsiveness. Improved performance results in greater fuel efficiency. Installs in less than 60 minutes using factory mounting points. No cutting or drilling to engine compartment is required. Replaces OE air filter with high flow high performance 360 degree radial flow air filter. Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed. Replaces factory air box with a heat-blocking shield that seals to the hood. Limited lifetime warranty

Add to Cart More information

ARB Air Locker Front 10 Bolt, Live Axle, 30 Spline, All Ratios, All Toyota Pickups

ARB Air Locker Front 10 Bolt, Live Axle, 30 Spline, All Ratios, All Toyota PickupsNote:
2) Must use late model 50.00mm (1.969&#34) ID bearings with this locker for this specific application.

The world&#39s most highly regarded traction aid, an ARB Air Locker is a driver controlled locking differential originally designed to give serious 4 wheelers the traction needed to combat extreme off road terrain. When extra traction is required, the driver activates the Air Locker via a convenient dash mounted switch. Pneumatic pressure supplied by an on board air compressor engages ARB&#39s patented locking mechanism within the Air Locker, thus preventing the wheels from turning independently. The Air Locker is deactivated by flicking a switch, returning the differential to normal.

ARB Air Locker&#39s patented design has proved ultra dependable, even in the most arduous conditions. It&#39s strength lies in its simplicity & minimal moving parts ensures maximum reliability. All structural components are manufactured from aerospace grades of high alloy steel, and where possible, we increase the number of differential pinion gears to distribute torque loads evenly. Many recent Air Locker designs also utilise timed gear sets to further improve strength, a design feature that has led to a second US patent on the product.

The Air Locker design process involves exhaustive testing. Computerised Finite Element Analysis (FEA) allows us to subject each Air Locker design to virtual off road simulations far more extreme than those encountered in real life. Destructive laboratory testing is carried out to ensure the strength of the Air Locker exceeds that of the axles or other driveline components. Environmental test cells subject prototype models to high (120ºC) and low (-24ºC) temperature running conditions, as well as harsh wheelspin engagement for cycle durations of more than 20,000 actuations. Finally, field-testing is carried out in the harshest environments imaginable.

Once the design phase is complete, Air Lockers are manufactured at our state-of-the-art facility in Melbourne, Australia. Available for both front and rear diffs, we have Air Lockers in over 100 configurations to suit a wide range of vehicles around the world.

Add to Cart More information

Pro Comp – 6 Inch Suspension Lift Kit w/ MX2.75c & MX6 Series Shocks – 2005 – 2007 Toyota Tacoma 4WD & Pre Runner 2WD

Note:

  1. All ride height increases are approximate and will vary due to vehicle specification.
  2. P/N EXP-57098 recommended for extended high speed use in 4×4 HI
  • Stage II system combines MX 2.75C coil over shocks with extended length steering knuckles and rock proof one-piece lower cross members constructed from laser cut 3/16” thick steel.
  • Ride height adjustable for 5” to 6” of lift.
  • Allows full range of compression and extension travel without binding ball joints.
  • Rack and pinion steering unit remains in factory location for ease of installation.
  • Reinforced bump stop extensions and sway bar drop brackets, 2.5” cast iron rear blocks, rear add-a-leaf and top grade hardware complete a rock solid package.
  • Stage I system provides all of the great features listed above without the MX 2.75C coil over shocks.
  • Coil over spacers allow the use of the factory coil over front struts for reduced cost and stock ride comfort.
  • 5 – 6 hour installation time. (cutting the factory cross member is required)

Add to Cart More information