Archive for the 'Axle Shafts' Category
Saturday, August 21st, 2010
| Doug Thorley 3.3L Xterra / Frontier Headers |
 Getting these new headers made by Doug Thorley has been a long process that took much longer than we anticipated. From the first prototype, to ordering the materials, bending the tubes, having small parts machined, welding, and ceramic coating, all mixed in with Doug Thorley’s other large projects, we finally got them done and the pre-orders have shipped. Being that the headers just arrived a few days ago, we haven’t squeezed a 3.3L Super Charged truck into Doug Thorley’s busy R&D department for test fitting quite yet but we’re working on getting this done as soon as possible. We know there are tons of you guys asking about these for your super charged trucks and I want to get you guys taken care of as well. For those that are interested in a set of headers right now, we do have them on the shelf ready to ship and can be ordered here: Nissan 3.3L Headers by Doug Thorley I thank you all for your patience while we pulled this project together.
-Steven Lutz |
| Currie F9 & Dana 60 Nissan Titan Rear Axles |
 It’s becoming more and more common for us to see the blown up factory Nissan Titan Dana 44 rear differentials. Luckily Currie Enterprises has noticed the need for a much stronger bolt in axle option. The only parts needed from your stock axle are the brakes. The new Titan rear axles are available with a Dana 60 or F9 differential. The Dana 60 uses 3″ axle tubes while the F9 uses 3.5″ Axle tubes. Both axles use 35-spline axle shafts while having various locker and gearing options available. This is a brand new product from Currie and they are looking for someone in Southern California interested in the F9 axle at a discounted rate for using their Nissan Titan truck in a photo shoot which will be published in an off-road magazine.
For more information contact Chris Nissley at Currie Enterprises by dialing 714-528-6957 |
| King of the Hammers 3: Anarchy – DVD |
 The latest King of the Hammers DVD is now available here: King of the Hammers 3: Anarchy – DVD
“Reserved for the most fearless, off road racing pushes adventure to the edge. This is an event so unimaginable it is now being call the most challenging off road race on the planet. Join 50,000 fanatics as they gather in So. Cal to watch 100 of the world’s best Ultra 4 drivers conquer 135 impossible miles of the most brutal rock trails and open desert terrain know to man.” |
Posted in Axle Shafts, Exhaust, Videos | No Comments »
Thursday, July 1st, 2010
Using Discount Code:981234 during online checkout will get you 5% OFF any non-sale items site wide until August 1, 2010.
Posted in Air Intake, Axle Shafts, Bumpers, Clutch, Compressors, Differential Locker, Differential Lockers, Exhaust, FRS Radio, GPS Systems, Gear Installation Kits, Guide Books, Handheld, Joints and Rod Ends, Kinetic Recovery Rope, Manuals, Maps, Miscellaneous, New Products, Non-Reservoir Shocks, Oil Filter, Performance, Performance Programmer, Racing Winchlines & Gear, Receivers, Recovery, Recovery Kits, Reservoir Shocks, Rock Sliders, Seats, Shocks, Solid Axle Swap, Solid Axle Swap Kits, Specials, Spotter Lines, Steering, Storage, Suspension, Suspension Lifts, Synthetic Winch Rope, Tech, Tents, Torsion Bars, Toyota 4-Runner, Toyota Pickup, Trail Runs, Transfercase, Tree Savers, Uncategorized, Videos, Winchline Extensions, Wind Deflectors, differential gears, floor mats, manual hubs, snow chains, transfer case, wheel spacers | No Comments »
Thursday, June 17th, 2010
| Doug Thorley 3.3L Xterra / Frontier Headers |
| It’s been a few months since we rolled the first Xterra into Doug Thorley for building the prototype headers. Now the first batch of headers are now getting ceramic coated. They should be back early next week and all pre-orders will be shipped shortly after. There are only a few more sets of headers still available from this first run, so if you’re looking to immediately replace your old under performing factory manifolds you can place your order here: Nissan 3.3L Xterra / Frontier Headers
We haven’t forgotten about the Super Charged 3.3 and we’ll be doing test fitting very soon. |
| 31-Spline H233B Chromoly Axle Shafts |
| It’s no secret that deep crawler gears and oversize tires lead to more stress on your vehicles drive train. With the growing number of deep gearing options available for your Nissan 4×4, the chances of drive train breakage are drastically increasing. Luckily we have chromoly axle shafts on the way for the Nissan Pathfinders and Hardbody’s running the 31-spline H233B rear axle. We should have them in hand ready to ship in about 6 weeks. You can reserve a set by ordering here: Pathfinder / Hardbody Chromoly Axle Shafts |
| TX-10 Transfer Case Doubler |
| We’re adding to the lineup of options to get that deep crawl ratio you’re been looking for. It won’t be long before we open up pre-orders for the TX-10 Transfer Case Doubler. We will need 10 pre-orders with a 50% deposit, the other 50% due when the complete doubler adapters are ready to ship. We’re looking at about a $950 price range for the doubler adapter and about 12 weeks time between pre-orders and delivery. We’ll have more details in a few weeks. |
Thanks for taking a look at this weeks new product newsletter. I’ll have more info on more products next week.
-Steven Lutz
Posted in Axle Shafts, Exhaust, transfer case | No Comments »
Wednesday, September 2nd, 2009
4-Pre-Orders Needed for Production
High Quality Axles:
- Chromolly 4140 Material
- Induction Hardened
- Rolled Splines
Note: For use with disk brakes, drum axle retainers will be needed.
Posted in Axle Shafts | No Comments »
Wednesday, September 2nd, 2009
4-Pre-Orders Needed for Production
High Quality Axles:
- Chromolly 4140 Material
- Induction Hardened
- Rolled Splines
Note: For use with disk brakes, drum axle retainers will be needed.
Posted in Axle Shafts | No Comments »
